Changing The Administrator Password In Web Config; Configuring Product Settings - Epson WorkForce Enterprise AM-C400 User Manual

You see the available Web Config utility options.
Parent topic:

Changing the Administrator Password in Web Config

You can change the administrator password using your product's control panel, Web Config, or Epson
Device Admin. You use the same administrator password in all cases.
Note: If you forget your administrator password, contact Epson for support.
1. Access Web Config as an administrator and select the Product Security tab.
2. Select Change Administrator Password.
3. Enter a user name, if necessary.
4. Enter the current password, then enter and confirm the new password in the fields provided.
Note: The default password is the product's serial number. Check the label on the back of
the product to locate the serial number. The default user name is blank.
5. Click OK.
Note: To restore the administrator password to the default value, select Restore Default Settings on
the Change Administrator Password screen.
Parent topic:

Configuring Product Settings

Follow the instructions in these sections to configure your product's control panel settings using the Web
Config software.
Checking Status Information
Managing the Network Connection
Setting Control Panel Options
Locking Individual Settings
Using an Email Server
Using an LDAP Server
Adjusting Power Saving Settings
Administering Your Product
Administering Your Product
376