Adjusting Print Quality; Print Head Maintenance; Checking The Nozzles Using The Product Control Panel - Epson WorkForce Enterprise AM-C400 User Manual

Adjusting Print Quality

If your print quality declines, you may need to use the product buttons to run a nozzle check and clean
the print head.
Note: If you are using your Epson product with the Windows 10 S operating system, you cannot use the
software described in this section. You also cannot download and install any Epson product software
from the Epson website for use with Windows 10 S; you must obtain software only from the Windows
Store.
Note: When using the PCL or PostScript (PS3) printer software with the product, you can clean the print
head and run a nozzle check by using the printer buttons. To download the standard Epson printer
software, visit
America) and select your product.
If running these utilities does not solve the problem, you may need to replace the ink cartridges.

Print Head Maintenance

Automatically Cleaning the Print Head Using the Product Control Panel
Print Head Maintenance
If your printouts become too light, or you see dark or light bands across them, you may need to clean the
print head nozzles. Cleaning uses ink, so clean the nozzles only if print quality declines.
You can check for clogged nozzles before you clean them so you don't clean them unnecessarily.
Note: You cannot clean the print head if an ink cartridge is expended, and may not be able to clean it
when a cartridge is low. You must replace the cartridge first.

Checking the Nozzles Using the Product Control Panel

Cleaning the Print Head Using the Product Control Panel
Parent topic:
Related topics
Replacing Ink Cartridges and Maintenance Boxes
Checking the Nozzles Using the Product Control Panel
You can check the print head nozzles using the control panel on your product.
epson.com/support (U.S.), epson.ca/support
Adjusting Print Quality
(Canada), or
297
latin.epson.com/support (Latin