Description; Power Switch; Test Switch; Battery Capacity/ Load Indicator - CyberPower CPS1500AVR User Manual

DESCRIPTION

1. Power Switch

Can be used as a master on/off switch
for equipment connected to the UPS.

2. Test Switch

Press this switch to run a self-test.

3. Battery Capacity/ Load Indicator

These indicators show a visual
indication of the battery charge as well
as the unit's load.
4. Power On Indicator
This LED is illuminated when the utility
condition is normal and the UPS
outlets are providing power, free of
surges and spikes.
5. AVR Indicator
This indicator is illuminated when the
unit's AVR feature is engaged.
6. Using Battery Indicator
This indicator is illuminated when the
unit is providing battery power.
7. Wiring Fault Indicator
This LED will illuminate to warn the
user that a wiring problem exists
within the AC receptacle, such as a
bad ground, miss ground or reversed
wiring. If illuminated, disconnect all
equipment and contact an electrician
to insure outlet is properly wired.
Guaranteed Uninterruptible Power System
9. Battery Backup, Surge Protection
and AVR Outlets.
Provides six battery powered, surge
protected, AVR outlets for connected
equipment and insures temporary
uninterrupted operation of connected
equipment during a power failure.
10.Two Serial Ports
Two ports allow connection and
communication between the UPS
and two computers. This allows the
simultaneous shutdown of two
computer systems.
11. Communication Protection Ports
Ports protect standard modem, fax,
telephone line or network cable.
12. 10' Power Cord
Heavy-duty long reach power cord
allows you to put power where you
need it.
13. Resettable Circuit Breakers
Resettable circuit breakers provide
optimal overload protection.
1
CPS1500AVR