Page 2
Thank You! hank you for your purchase of the Lionel B60 Baggage and/or RPO cars! These cars include constant voltage interior LED lighting boards with capacitors that store energy so that they will never flicker again! Note! Lionel B60 Baggage and RPO cars require a minimum curve diameter of 42”. Do not attempt to operate these cars through O-36 switches or curves.
Table of Contents Car operations Switching the interior lights on and off Lamp replacement Replacing the lamps Removing the car body Notes Limited Warranty/Lionel Service...
B60 Baggage Car operations Switching the interior lights on and off our B60 Baggage car is equipped with a switch that turns the marker lights on and off. As illustrated in Figure 2, the switch is located between the trucks on the underside of the car. body screws Marker Lights ON/Off Switch...
In the event you need to replace an LED please contact a Lionel Factory Trained Authorized Service Station or Lionel Customer Service. Note! Because the capacitor must be charged at initial power up, your LED lighting will not be at full intensity immediately upon powering your train.
Lamp replacement Removing the car body f you would like to access the interior of the car to add other details to the interior, the body can be removed with just three or four screws. Body screws are located in each corner of the car.
Lionel LLC or any Lionel Authorized Service Station MUST be accompanied by the original receipt for purchase (or copy) from an Authorized Lionel Retailer*, will at the discretion of Lionel LLC, be repaired or replaced, without charge for parts or labor. In the event the defective product cannot be repaired, and a suitable replacement is not available, Lionel will offer to replace the product with a comparable model (determined by Lionel LLC), if available.
Need help?
Do you have a question about the B60 Baggage & RPO Cars and is the answer not in the manual?
Questions and answers