Page 1
fixing device provided should fit most wall types, but please note Phillips & Flathead screwdrivers required. that different wall materials may require different fixing devices from For quicker assembly, we recommend the those supplied. use of a power drill on a low-speed setting. mocka.co.nz I mocka.com.au I...
Page 2
Georgia Bedside Table mocka.co.nz I mocka.com.au I...
Page 3
Attach 4 x bolts (D) to panel [1]. Tighten with a screwdriver. Attach 1 x rail (M) and 1 x rail (N) to panels [2] and [3] and secure with 4 x screws (E). Tighten with a screwdriver. mocka.co.nz I mocka.com.au I...
Page 4
Georgia Bedside Table Attach panel [1] to panels [2] and [3] and secure with 4 x locking Slide panel [4] into position as shown. nuts (C).Tighten with a screwdriver. mocka.co.nz I mocka.com.au I...
Page 5
Attach 1 x fastener (G) to leg [6] and secure with 2 x bolts (Q). assembled frame as shown and secure with 4 x screws (B). Tighten Tighten with an allen key (R). Repeat this step x 4 times. with a screwdriver. mocka.co.nz I mocka.com.au I...
Page 6
Attach legs [6] x 4 to panel [5] and secure with 16 x screws (F). Attach 4 x braces (K) to assembled frame and secure with 4 x screws (L). Tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz I mocka.com.au I...
Page 7
4 x locking nuts (C). Attach 1 x [7] and [8] to panel [9] and secure with 4 x screws (B). Tighten with a handle (O) to panel [11] and secure with 1 x screws (P). Tighten with a screwdriver. screwdriver. mocka.co.nz I mocka.com.au I...
Page 8
Georgia Bedside Table Slide assembled draw into position as shown. Attach safety strap (J) to assembled furniture and secure with 1 x screw (L) and 1 x washer (H). Tighten with a screwdriver. mocka.co.nz I mocka.com.au I...
Page 9
(J). Fasten to the wall using 1x wall anchor (I), 1x screw (B) and 1 x washer (H). Ensure unit is balanced and steady before use. mocka.co.nz I mocka.com.au I...
Need help?
Do you have a question about the Georgia and is the answer not in the manual?
Questions and answers