Page 1
Genevieve Bedside Table Thank you for your purchase. WARNING: Any furniture that is not anchored to a wall has the potential to Please follow the instructions below for correct assembly. tip over in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthpuake.
Page 2
Genevieve Bedside Table Attach 2 x left slide rails (G) to panel [3] and secure with 4 x small screws (E). Attach 1 x wall strap (W) to panel [1] using 1 x screw (Y). Insert 4 x bolts (A) into Attach 2 x right slide rails (G) to panel [4] and secure with 4 x small screws (E).
Page 3
Genevieve Bedside Table Attach panels [5] to panel [2] and secure with 8 x long screws (D). Insert 4 x dowels (C) into panels [3] and [4]. Attach panels [3] and [4] to panel [2] and secure Tighten with a screwdriver.
Page 4
Genevieve Bedside Table Slide panel [6] between the grooves on panels [3] and [4] to form the back of Insert 4 x dowels (C) into panels [3] and [4]. Attach panel [1] to panels [3] and [4] and the unit as shown. Tighten with a screwdriver.
Page 5
Genevieve Bedside Table Drawers (x2) Drawers (x2) Slide panels [8] between the grooves on panels [9], [10] and [11] to form the base of the Insert 8 x bolts (A) into panels [7]. Attach panels [9] and [10] to panels [11].
Page 6
Genevieve Bedside Table Drawers (x2) Slide drawers x 2 between the grooves on panels [3] and [4] to form Attach 4 x slide rails (H) to panels [9] and [10], secure with 8 x small screws (E). the back of the unit as shown.
Page 7
Genevieve Bedside Table Strap Washer Wall anchor Wall screw Wall screw Once assembled lift furniture into place, do not drag. Use a drill to create a small hole lining up with the top of the safety strap (W). Fasten to wall using 1 x wall plug (X), 1 x washer (Z) and 1 x wall screw (not supplied).
Need help?
Do you have a question about the Genevieve and is the answer not in the manual?
Questions and answers