Advertisement
Quick Links
Genevieve Change Table
W A R N I N G
!
• READ all instructions before use of the change
table.
• FALL HAZARD: children have suffered serious
injuries after falling from changing tables. Falls can
happen quickly.
• STAY in arm's reach of your child and NEVER
leave a baby unattended on any change surface.
• ALWAYS keep one hand on the baby when using
the change table to prevent the baby from falling.
• DO NOT use if the product is damaged or broken.
• NEVER allow baby to sleep on the change table.
This item is NOT a safe sleeping surface.
• REMOVE all hazards from the change table area
out of reach of your baby (E.G pins, lotions, toys).
• SUITABLE FOR: newborn to 12 months. Maximum
to 11 kgs.
• READ and follow the manufacturer's instructions
and KEEP for future use.
• USE a changing pad that is 78cm x 46cm x 10cm.
mocka.co.nz I mocka.com.au
!
• WARNING this product is not intended to be used
without a changing pad. use of this product without a
changing pad may result in death or serious injury to
your child from falling.
• WARNING to help avoid any serious or fatal injury,
this product comes included with a wall strap to pre-
vent topping. we strongly recommend that this prod-
uct be permanently fixed to a wall or other suitable
surface by a qualified tradesperson.
• CLEANING & CARE
DO NOT use the product unless all components are
correctly fitted and adjusted. regularly inspect the
change table for maintenance of loose screws etc.
DO NOT use the change table if any part is broken,
torn or missing. contact the manufacturer for further
advice.
WIPE the change table clean using a clean damp cloth
and suitable commercial cleaner.
• ENSURE the changing table is level, stable and struc-
turally sound.
manufactured by: mocka products pty ltd. po box 18,
pinkenba, qld 4008. mocka limited, po box 29335, ric-
carton, christchurch 8440, nz
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Mocka Genevieve Change Table
Summary of Contents for Mocka Genevieve Change Table
- Page 1 KEEP for future use. turally sound. • USE a changing pad that is 78cm x 46cm x 10cm. manufactured by: mocka products pty ltd. po box 18, pinkenba, qld 4008. mocka limited, po box 29335, ric- carton, christchurch 8440, nz...
- Page 2 Genevieve Change Table bolt bolt screw hinge bolt handle allen key HARDWARE SUPPLIED Phillips screwdrivers required. For quicker assembly, we recommend the use of a power drill on a low-speed setting. wall screw screw washer wall anchor wall strap WALL STRAP...
- Page 3 Genevieve Change Table Pillips screwdiver Pillips screwdiver Attach 4x hinges (I) to panel [1] and panel [2] with 16x screws (C) as shown. Attach 2x handles (K) to panel [3] and panel [4] with 2x bolts (J). Tighten screws with Pillips screwdiver.
- Page 4 Genevieve Change Table Attach 4x panels [5] to panel [6] with 8x bolts (B). Attach panel [6] to panel [7] with 3x bolts (A). Tighten bolts with allen key (L). Tighten bolts with allen key (L). mocka.co.nz I mocka.com.au...
- Page 5 Genevieve Change Table Attach panel [2] to panel [6] and panel [7] with 5 bolts (A). Slide 2x panels [8] into the grooves on panel [2] and panel [7]. Tighten bolts with allen key (L). mocka.co.nz I mocka.com.au...
- Page 6 Genevieve Change Table Attach panel [1] to panel [6] and panel [7] with 5x bolts (A). Attach 2x panels [9] to panel [1] and panel [2] with 8x bolts (B). The 2x panels [8] needs to fit into the groove of the panel [1].
- Page 7 Genevieve Change Table Pillips screwdiver Attach panel [10] to panel [1] and panel [2] with 4x bolts (A). Align 2x hinges (I) with the grooves on the panel [4]. Attach panel [11] to panel [1] and panel [2] and panel [6] with 7x bolts (A).
- Page 8 Genevieve Change Table Pillips screwdiver Align 2x hinges (I) with the grooves on the panel [3]. Once assembled lift furniture into place, do not drag. Attach 2x hinges (I) to panel [3] with 4x screws (C) as shown. Attach wall strap (H) to panel [7] with 1x washer (F) and 1x screw (E).
Need help?
Do you have a question about the Genevieve Change Table and is the answer not in the manual?
Questions and answers