New Standards
for Dimension Measurement
Original collimator lens
Class-1 laser
First in its class
Measurable at any
position
The usual limitations, such as the 'measurement area being confined to the center'
or 'large errors due to positioning', that used to plague laser measuring sensors
have now been overcome. Measurements can be consistently taken within a 500
mm area, whatever stage the work is at or whichever way it is inserted. It can now
be set to positions without interference from the work feed and without limitations of
size of work area.
What does "10-micron by 500-mm" mean?
An example of 10-mircon
by 500-mm accuracy.
It is like measuring the gap
between a 50-meter long airplaine
and the runway when it is
just 1mm off the ground.
2
500mm
100
times
About 50m
Runway
Best in class
10-micro
meters
1mm
5