Download Print this page
Roban A 109 Instruction Manual

Roban A 109 Instruction Manual

Scale fuselage 600 size
Hide thumbs Also See for A 109:

Advertisement

Quick Links

Instruction manual
Scale Fuselage A 109
600 size
1. INTRODUCTION
Thank you for buying Roban Model products. The 600 size A-109 scale fuselage is designed as an easy
to use product. Please read the manual carefully before assembling the model, and follow all
precautions and recommendations located within the manual. Be sure to retain the manual for future
reference, routine maintenance and tuning. The scale fuselage is designed for T-REX 600 Helicopter
series use. You can easily put it on your T-REX 600 for new clothing.
Important Note
Roban Model R/C Helicopters are advanced, high-performance devices, built incorporating the latest
technologies. They are not intended as toys, and improper use can potentially lead to serious injury,
or even fatal accidents. We implore you to read this manual thoroughly before operating these
models. Safety should be your utmost priority - not just your own, but also that of others and your
surroundings when piloting Roban Model products.
Liability Disclaimer:
The manufacturer and the seller cannot accept liability for the operation or misuse of this product.
Roban Model R/C helicopters are intended to be used exclusively by experienced adults in legally
sanctioned flying fields. Once sold, we cannot monitor or control the product's operation or usage.
Operation Guidelines:
Upon assembly of the scale fuselage, the weight and complexity of the structure will increase. To
mitigate risk of accidents and damages, we advise against attempting 3D flights.
Skill Requirements:
The operation of R/C products necessitates a certain level of skill and familiarity. Any damages or
dissatisfaction resulting from accidents, modifications, or operational mishaps are not covered under

Advertisement

loading
Need help?

Need help?

Do you have a question about the A 109 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Roban A 109

  • Page 1 600 size 1. INTRODUCTION Thank you for buying Roban Model products. The 600 size A-109 scale fuselage is designed as an easy to use product. Please read the manual carefully before assembling the model, and follow all precautions and recommendations located within the manual. Be sure to retain the manual for future reference, routine maintenance and tuning.
  • Page 2 any warranty. Consequently, such products cannot be returned for repair or if you experience problems during operation or maintenance. 2. OPERATIONAL GUIDELINES FOR SAFETY IN USING R/C AIRCRAFT MODELS Safety Zone: Prioritize the safety of others by operating R/C aircraft models in isolated areas, free of bystanders. Avoid piloting these models near residential zones or large groups of people.
  • Page 3 3. CONTENTS OF KIT Please check the contents of the kit prior to installation. CONTENTS Item No. Description Quantity Landing gear Screw A2x8 Ball joint connectors Linkages Screw M2x8 Linkage connectors Servo mount Washers Washer M3 Nut M2 Screw A2x25 Windows Front window...
  • Page 4 Screw A2x5 Tail skid Tail unit 17-18 Lamp covers Screw M3x10 REQUIRED TOOLS / CONSUMABLES Tool No. Tool/Consumable Additional Info Hobby knife Allen wrench Phillips screwdriver File Side cutters Silicone adhesive Super glue 2K Epoxy glue Fine sandpaper Scissors 20g Servo...
  • Page 5: Installation

    4. INSTALLATION Mount the landing gear using 8 pieces of Screw A2x8 as shown. Mount the landing gear using 4 pieces of Screw A2x8 as shown. Install the connectors on the linkages as shown.
  • Page 6 Secure the ball heads with Screw M2x8 as shown. Install the servo. The linkages should be mounted on the servo levers using the connectors as shown. Secure the ball head with Screw M2x8 as shown.
  • Page 7 Install the servo. The linkage should be mounted on the servo lever using the connector as shown. Remove the tail cover as shown. Dismantle the tail rotor as shown.
  • Page 8 4.10 Glue the washers as shown. 4.11 Install the washers as shown. 4.12 Insert the mechanics into the fuselage.
  • Page 9 4.13 Install the tail rotor. 4.14 Install the tail cover. 4.15 Mount the mechanics with 4 pieces of Screw M2x25 and Washer M2.
  • Page 10 4.16 Glue in the windows. 4.17 Secure the front window with 4 pieces of Screw A2x5. 4.18 Glue in the tail skid.
  • Page 11 4.19 Glue the tail units with epoxy resin adhesive. 5. SPAREPART LIST 600 A109 HSB-AG600WR AG600PJ001 600A109 前头 canopy 600 A109 AG600PJ002 600A109 前窗 front window 600A109 全套 600 A109 AG600PJ003 窗 all windows 600 A109 AG600PJ004 600A109 平尾 tail wings 600A109 脚架...
  • Page 12 4. FULLY ASSEMBLED FUSELAGE Specifications: Lenght: 1320mm Height: 442mm Width: 330mm Weight: 1000g Suitable for Align TREX600ESP/EFL/PRO and derivatives We wish you a lot of fun with the fuselage! Copyright 2024 – www.robanmodel.com...

This manual is also suitable for:

600 a-109 era600 a-109600 a-109 coast guardHsb-ag600wrHsb-ag600erHsb-ag600w ... Show all