Download Print this page
Roban AS 350 Instruction Manual

Roban AS 350 Instruction Manual

Scale fuselage 500 size
Hide thumbs Also See for AS 350:

Advertisement

Quick Links

Instruction manual
Scale Fuselage AS 350
500 size
1. INTRODUCTION
Thank you for buying Roban Model products. The 600 size MD500D/E scale fuselage is designed as an
easy to use product. Please read the manual carefully before assembling the model, and follow all
precautions and recommendations located within the manual. Be sure to retain the manual for future
reference, routine maintenance and tuning. The scale fuselage is designed for T-REX 600 Helicopter
series use. You can easily put it on your T-REX 600 for new clothing.
Important Note
Roban Model R/C Helicopters are advanced, high-performance devices, built incorporating the latest
technologies. They are not intended as toys, and improper use can potentially lead to serious injury,
or even fatal accidents. We implore you to read this manual thoroughly before operating these
models. Safety should be your utmost priority - not just your own, but also that of others and your
surroundings when piloting Roban Model products.
Liability Disclaimer:
The manufacturer and the seller cannot accept liability for the operation or misuse of this product.
Roban Model R/C helicopters are intended to be used exclusively by experienced adults in legally
sanctioned flying fields. Once sold, we cannot monitor or control the product's operation or usage.
Operation Guidelines:
Upon assembly of the scale fuselage, the weight and complexity of the structure will increase. To
mitigate risk of accidents and damages, we advise against attempting 3D flights.
Skill Requirements:

Advertisement

loading
Need help?

Need help?

Do you have a question about the AS 350 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Roban AS 350

  • Page 1 500 size 1. INTRODUCTION Thank you for buying Roban Model products. The 600 size MD500D/E scale fuselage is designed as an easy to use product. Please read the manual carefully before assembling the model, and follow all precautions and recommendations located within the manual. Be sure to retain the manual for future reference, routine maintenance and tuning.
  • Page 2: Contents Of Kit

    The operation of R/C products necessitates a certain level of skill and familiarity. Any damages or dissatisfaction resulting from accidents, modifications, or operational mishaps are not covered under any warranty. Consequently, such products cannot be returned for repair or if you experience problems during operation or maintenance.
  • Page 3 CONTENTS Item No. Description Quantity Landing gear struts Screw A2x12 T-connectors Landing gear skids Step Screw A2x6 Screw A2x12 Washer 3x16x62 Screw M2x25 Screw M2x10 Washer M2.5 EVA rear rubber Tail skid Tail unit Upper windows Side windows Lower windows REQUIRED TOOLS / CONSUMABLES Tool No.
  • Page 4: Installation

    4. INSTALLATION Mount the landing gear linkage with 4 pieces of Screw A2x12 as shown. Mount the T-connectors as shown. Mount the skids and glue them as shown.
  • Page 5 Mount the step plates with Screws A2x12 and A2.5x6 as shown. Remove the tail cover. Remove the tail rotor of the mechanism as shown.
  • Page 6 Glue the washers as shown. Mount the washers on the mechanism as shown. Install the mechanism in the fuselage.
  • Page 7 4.10 Install the tail rubber. 4.11 Install the tail rotor. 4.12 Glue the tail skid.
  • Page 8 4.13 Install the tail cover as shown. 4.14 Secure the mechanism in the fuselage with Screws M2x10, M2x25, and Washer M2. 4.15 Glue the tail unit as shown with epoxy resin adhesive.
  • Page 9 4.16 Glue the window panes. 4.17 Glue the window panes. 4.18 Glue the window pane.
  • Page 10: Spare Part List

    4. SPAREPART LIST 500AS350 前 500 AS-350 HSB-AS500RC AS500PJ001 头 canopy 500 AS-350 500AS350 前 AS500PJ002 front 窗 window 500AS350 全 500 AS-350 AS500PJ003 套窗 all windows 500AS350 平 500 AS-350 AS500PJ004 尾 tail wings 500AS350 尾 500 AS-350 AS500PJ005 巴...
  • Page 11 4. FULLY ASSEMBLED FUSELAGE Specifications: Lenght: 1025mm Height: 262mm Width: 215mm Weight: 550g Suitable for Align TREX500 and derivatives We wish you a lot of fun with the fuselage! Copyright 2024 – www.robanmodel.com...