Download Print this page
Roban A 109 Instruction Manual

Roban A 109 Instruction Manual

Scale fuselage 500 size
Hide thumbs Also See for A 109:

Advertisement

Quick Links

Instruction manual
Scale Fuselage A 109
500 size
1. INTRODUCTION
Thank you for buying Roban Model products. The 600 size MD500D/E scale fuselage
is designed as an easy to use product. Please read the manual carefully before
assembling the model, and follow all precautions and recommendations located
within the manual. Be sure to retain the manual for future reference, routine
maintenance and tuning. The scale fuselage is designed for T-REX 600 Helicopter
series use. You can easily put it on your T-REX 600 for new clothing.
Important Note
Roban Model R/C Helicopters are advanced, high-performance devices, built
incorporating the latest technologies. They are not intended as toys, and improper
use can potentially lead to serious injury, or even fatal accidents. We implore you to
read this manual thoroughly before operating these models. Safety should be your
utmost priority - not just your own, but also that of others and your surroundings
when piloting Roban Model products.
Liability Disclaimer:
The manufacturer and the seller cannot accept liability for the operation or misuse
of this product. Roban Model R/C helicopters are intended to be used exclusively by
experienced adults in legally sanctioned flying fields. Once sold, we cannot monitor
or control the product's operation or usage.
Operation Guidelines:
Upon assembly of the scale fuselage, the weight and complexity of the structure will
increase. To mitigate risk of accidents and damages, we advise against attempting 3D
flights.
Skill Requirements:
The operation of R/C products necessitates a certain level of skill and familiarity. Any
damages or dissatisfaction resulting from accidents, modifications, or operational
mishaps are not covered under any warranty. Consequently, such products cannot

Advertisement

loading
Need help?

Need help?

Do you have a question about the A 109 and is the answer not in the manual?

Questions and answers

Summary of Contents for Roban A 109

  • Page 1 Liability Disclaimer: The manufacturer and the seller cannot accept liability for the operation or misuse of this product. Roban Model R/C helicopters are intended to be used exclusively by experienced adults in legally sanctioned flying fields. Once sold, we cannot monitor or control the product's operation or usage.
  • Page 2 be returned for repair or if you experience problems during operation or maintenance. 2. OPERATIONAL GUIDELINES FOR SAFETY IN USING R/C AIRCRAFT MODELS Safety Zone: Prioritize the safety of others by operating R/C aircraft models in isolated areas, free of bystanders. Avoid piloting these models near residential zones or large groups of people.
  • Page 3: Contents Of Kit

    3. CONTENTS OF KIT Please check the contents of the kit prior to installation. CONTENTS Item No. Description Quantity Landing gear Screw A2x8 Ball joint connectors Linkages Screw M2x8 Linkage connectors Servo mount Washers Washer M3 Nut M2 Screw A2x25 Windows Front window Screw A2x5...
  • Page 4 REQUIRED TOOLS / CONSUMABLES Tool No. Tool/Consumable Hobby knife Allen wrench Phillips screwdriver File Side cutters Silicone adhesive Super glue 2K Epoxy glue Fine sandpaper Scissors 20g Servo...
  • Page 5: Installation

    4. INSTALLATION 4.1 Mount the landing gear with 8 pieces of Screw A2x8 as shown. 4.2 Mount the landing gear with 4 pieces of Screw A2x8 as shown. 4.3 Install the connectors on the linkages as shown. 4.4 Secure the ball joints with Screw M2x8 as shown.
  • Page 6 4.5 Install the servo. The linkages should be mounted on the servo levers using the connectors as shown. 4.6 Secure the ball joint with Screw M2x8 as shown. 4.7 Install the servo. The linkage should be mounted on the servo lever using the connector as shown.
  • Page 7 4.8 Remove the tail cover as shown. 4.9 Dismantle the tail rotor as shown. 4.10 Glue the washers as shown.
  • Page 8 4.11 Install the washers as shown. 4.12 Insert the mechanism into the fuselage. 4.13 Install the tail rotor, use the rubber to distance the tube.
  • Page 9 4.14 Install the tail cover. 4.15 Secure the mechanic with 4 pieces of Screw M2x25 and Washer M2. 4.16 Glue the windows.
  • Page 10 4.17 Secure the front window with 4 pieces of Screw A2x5. 4.18 Glue the tail skid. 4.19 Glue the tail units with epoxy resin adhesive.
  • Page 11: Spare Part List

    6. SPAREPART LIST 500 A109 HSB-AG500WR AG500PJ001 500A109 前头 canopy 500 A109 AG500PJ002 500A109 前窗 front window 500A109 全套 500 A109 AG500PJ003 窗 all windows 500 A109 AG500PJ004 500A109 平尾 tail wings 500A109 脚架 500 A109 AG500PJ005 组 retract set 500 A109 500A109 固定...
  • Page 12 5. FULLY ASSEMBLED FUSELAGE Specifications: Length: 998mm Height: 355mm Width: 226mm Weight: 100g Suitable for Align TREX500ESP/EFL/PRO and derivatives We wish you a lot of fun with the fuselage! Copyright 2024 – www.robanmodel.com...

This manual is also suitable for:

Md500dMd500e500 a-109Hsb-ag500wrHsb-ag500er