Plc Clock Settings - Omron WS02-SIMC1-E - V1.9 REV 12-2009 Operation Manual

System Status Setting Window

3-7-5 PLC Clock Settings

The [PLC Clock Settings] window allows to set the clock-related PLC opera-
tion.
1,2,3... 1. Selecting [PLC Clock Settings] in the [System Status Setting] | [Settings]
menu will display the [PLC Clock Settings] window.
Cycle Time Mode Settings Specify in which mode to display when moni-
•
Scan interval
•
Max. CPU
•
OK
•
Cancel
•
2. Click the [OK] button when setting is completed.
toring the cycle time.
Estimated Cycle Time: Virtually estimated
•
cycle time in the actual PLC.
Simulated Cycle Time: The elapsed time in
•
the actual computer.
Specify the execution interval for Continuous
step run and Continuous scan run in the unit of
0.1 seconds.
Represent maximum CPU occupancy where
the Ladder Engine occupies CPU in the com-
puter. Exceeding the maximum occupancy
causes Wait to be added in the cycle process
automatically. (The initial value is 60%.)
Save the current setting and exit the window.
Discard the current setting and exit the window.
Section 3-7
67