Omron WS02-SIMC1-E - V1.9 REV 12-2009 Operation Manual page 254

I/O Memory Allocation
Address
Words Bits
A343 A34300 Memory
to Card Type
A34302
A34306 EM File
Memory
Format
Error Flag
A34307 Memory
Card For-
mat Error
Flag
A34308 File Trans-
fer Error
Flag
A34309 File Write
Error Flag
A34310 File Read
Error
A34311 File Missing
Flag
A34313 File Mem-
ory Instruc-
tion Flag
A34314 Accessing
File Data
Flag
Name
Indicates the type of Memory
Card, if any, installed.
ON when a format error occurs in
the first EM bank allocated for file
memory.
(The flag is turned OFF when
formatting is completed nor-
mally.)
ON when the Memory Card is not
formatted or a formatting error
has occurred. (The flag is turned
OFF when formatting is com-
pleted normally.)
ON when an error occurred while
writing data to file memory. (The
flag is turned OFF when PLC
operation begins or data is written
successfully.)
ON when data cannot be written
to file memory because it is
write-protected or the data ex-
ceeds the capacity of the file
memory. (The flag is turned OFF
when PLC operation begins or
data is written successfully.)
ON when data could not be read
from file memory because the file
was corrupted. (The flag is turned
OFF when PLC operation begins
or data is read successfully.)
ON when the file memory doesn't
exist or the source file doesn't
exist.
(The flag is turned OFF when
PLC operation begins or data is
read successfully.)
ON when a file memory instruc-
tion is being executed.
ON while file data is being ac-
cessed.
CS/CJ-series PLC
Function
CX-Simulator
Settings Function
0: None Set as Memory
Card is always
4: Flash installed.
ROM
1: Format Same as
error CS/CJ-series
PLC.
0: No for-
mat
error
1: Format Same as
error CS/CJ-series
PLC.
0: No for-
mat error
1: Error Same as
CS/CJ-series
0: No error PLC.
1: Write not Not used.
possible
0: Normal
condition
1: Read not Same as
possible CS/CJ-series
PLC.
0: Normal
condition
1: Specified Not used.
file missing
0: Normal
condition
1: Instruc- Not used.
tion being
executed.
0: Instruc-
tion not
being exe-
cuted.
1: File be- Not used.
ing ac-
cessed
0: File not
being ac-
cessed
Section 9-3
Settings
4:Flash
ROM
215