Omron WS02-SIMC1-E - V1.9 REV 12-2009 Operation Manual page 275

I/O Memory Allocation
Address
Words Bits
A620 A62100 Communi-
to cations
A63515 Units 0 to
15, Ports 1
to 4 Set-
tings
Changing
Flag
A636 Communi-
cations
Board Set-
tings
Changing
Flag
A63601 Port 1
A63602 Port 2
A63603 Port 3
A63604 Port 4
236
Name
The corresponding flag will be
ON when the settings for that port
are being changed.
The flag will be turned ON when
STUP(237) is executed and it will
be turned OFF by an event is-
sued from the Serial Communi-
cations Unit after the settings
have been changed.
It is also possible for the user to
indicate a change in serial port
settings by turning these flags
ON.
The corresponding flag will be
ON when the settings for that port
are being changed.
The flag will be turned ON when
STUP(237) is executed and it will
be turned OFF by an event is-
sued from the Serial Communi-
cations Board after the settings
have been changed.
It is also possible for the user to
indicate a change in serial port
settings by turning these flags
ON.
CS/CJ-series PLC
Function
CX-Simulator
Settings Function
1: Chang- Not used.
ing
0: Not
changing
1: Chang- Not used.
ing
0: Not
changing
Section 9-3
Settings