Explanation
• Execute read-
out (READ)
using the Con-
stant Copy
Function Selec-
tion (n176).
• Set Constant
Read Prohibited
Selection
(n177) to read-
*2
disabled.
* 1. When reading is enabled (n177=1), this setting is not necessary.
* 2. This setting is not necessary unless read-prohibition is selected.
• Change the constant
number by pressing the
or
key.
• Press
to dis-
ENTER
play the set value.
• Change the set value to
rEd by pressing the
key.
• Press
.
ENTER
• Press
or
DSPL
.
ENTER
• Change the constant
number to n177 by
pressing the
or
• Press
to dis-
ENTER
play the set value.
• Change the set value to
0 by pressing the
key.
• Press
.
ENTER
6 Programming Features
Operator Display
(Lit)
(Lit)
or
(Flashes while executing the read.)
↓
(End is displayed after the
read has been completed.)
(The constant number is displayed.)
key.
(Lit)
(Flashes)
or
(Lit for one second.)
↓
(The constant number is displayed.)
171