Omron V680 - MANUAL 2 User Manual page 58

Section 4
Installation
Amplifier Cable Bending Radius
Attaching/Removing V680-HA63B/-HS63/-HS52/-HS65 Connectors
Attaching the Connector
1.
Hold the Antenna connector, align the key,
and insert the connector into the Amplifier
connector.
Key
Removing the Connector
1.
Turn the connector counterclockwise to
release the lock.
The connector will not come out unless the lock is first released by turning the connector. To remove the cable, release the
lock and pull on the connector. Pulling the cable without releasing the lock may break or damage the cable.
RFID System
56
User's Manual
Antenna connector
Do not bend the cable past a bending radius of 35 mm.
2.
Turn the connector clockwise to lock it in place.
2.
Pull the Antenna connector straight out.
Antenna connector