Omron SHL Datasheet page 9

Molded Terminal Models
■ Model Number Legend
Molded Terminal Models
SHL-@55-@@M@
1 2 3 4
Items 1 (Actuator) and 2 (Rated Current) are the same as those in Standard Models.
3. Operation Indicator
None: Not provided
L: Neon Lamp: 90 to 250 VAC
L2: LED: 12 V
L3: LED: 24 V
L4: LED: 24 V
L5: LED: 48 V
Use of the molded terminal model is recommended in locations subject to excessive dust, oil drips, or moisture.
All types of SHL Switches can be fabricated into a molded terminal version. In this case, the molded terminal model will have the same dimensions
an operating characteristics as the basic model from which the molded terminal model is fabricated.
ML
Lead Supplies
Leads Nominal cross-
sectional area
VCTF (Vinyl cabtire
0.75 mm
cable)
■ Operation Indicator-equipped Models
UL, CSA and/or EN (IEC) approved models are available.
The molded terminal model may be equipped with an operation indicator (neon lamp or LED) upon request to facilitate maintenance and inspection.
The operation indicator is designed to illuminate when the Switch is not operating. (Because of the molded terminal model, any change to the
Switch wiring cannot be made.)
AC Operation
A neon lamp indicator is provided.
The operating voltage is 90 to 250 VAC.
Neon lamp
Transparent terminal
protection cover
Operating characteristics are the same as the basic model from
which the operation indicator equipped model is fabricated.
Dimension are the same as the standard model.
MR
MD
No. of conductors/
cond. dia.
2 30/0.18 dia.
Matte finish
4. Location of Lead Outlet
R: Right-hand
L: Left-hand
D: Underside
Suffix by Location of Lead Outlet
Location of lead outlet
Right-hand
Left-hand
Underside
Note: Three leads (COM, NO, and NC) are provided for terminal con-
nections.
Example:
Basic type: SHL-Q2255
Location of lead outlet: Right-hand
When placing your order for the above Switch specify the model
number as SHL-Q2255-MR
Finished outside Terminal
diameter connections
3-core 7 dia. Black:
White: NO
Red:
Example:
Basic type: SHL-Q2255-01MR
When placing your order for the molded terminal model with an neon
lamp operation indicator, specify the model number as SHL-Q2255-
01LMR.
Contact Circuit
Power supply
Built-in switch
Neon lamp R = 240 kΩ
Enclosed Switch
Model
SHL-@-MR
SHL-@-ML
SHL-@-MD
Standard length
COM 3 m
NC
Load
SHL
F-53