Enabling Grip Switch
A4EG
Enabling Grip Switch with Distinct Feel
for Three Easily Discernible Positions
• In addition to the standard models, the lineup also includes
models with an emergency stop switch and models with a
momentary operation switch.
• An optional Holding Key (sold separately) provides a versatile
method for selecting modes.
• Equipped with conduit connector.
Be sure to read the "Safety Precautions" on page 10.
Features
Positive Operating Feel
Original Double Snap Action switch mechanism lets the operator
precisely confirm the enable position.
Press the
top
part...
Press the
bottom
Single-press design ensures a
positive click feel when only one
part of the switch is pressed, to
enable positive confirmation.
Selection Based on Application
In addition to the standard models, the lineup also includes models
with an emergency stop switch and models with a momentary
operation switch.
A4EG-C000041
A4EG-BE2R041
Equipped with an
Wall-mounted with Bracket
Emergency Stop Switch
part...
A4EG-BM2B041
Equipped with a
Momentary Operation Switch
For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.
Safety Circuits Are Easy to Configure
Safety circuits can be easily configured by combining the A4EG with
the G9SX-GS Safety Guard Switching Unit.
Safety Door Switch
Enable Grip Switch
D4NS or others
A4EG
The Selector Switch can be used to switch between
normal operating mode (using the Door Switch) and
maintenance mode (using the Enabling Grip Switch).
Note: Refer to page 8 for information on
Safety Guard
connecting to the G9SX-GS.
Switching Unit
G9SX-GS
A Holding Key can be used to change modes
rather than a key-type selector switch.
Normal operating mode
Maintenance mode
CSM_A4EG_DS_E_7_1
Safety Key Selector Switch
A22TK
Safety Door Switch
D4NS
1