Related Manuals for Electrolux Professional thermaline 1/ GN
Summary of Contents for Electrolux Professional thermaline 1/ GN
- Page 1 Multibraiser 1/1 GN – 2/1 GN EN-US Installation and Operating manual 599A0UP00 - 82.8060.11- 2021.03...
- Page 2 Foreword Read the following instructions, including the warranty terms before installing and using the machine. Visit our website www.electroluxprofessional.com and open the Support section to: Register your product Get hints & tips of your product, service and repair information The installation, use and maintenance manual (hereinafter Manual) provides the user with information necessary for correct and safe use of the machine (or “appliance“).
-
Page 3: Table Of Contents
Contents A WARNING AND SAFETY INFORMATION....................5 General information ........................5 Personal protection equipment ......................6 General safety ..........................6 General safety rules ........................7 Safety signs to be placed near the machine area ................. 8 Transport, handling and storage ...................... 9 Installation and assembly ....................... - Page 4 OPERATING INSTRUCTIONS ....................... 28 Use ............................28 Features ........................... 28 Glass display ..........................28 Steel display..........................28 Main switch (optional) ........................28 First use ........................... 28 Using 2/1 appliance ........................29 I.7.1 Temperature control......................29 I.7.2 Roasting ......................... 29 I.7.3 Boiling and braising ......................
-
Page 5: Awarning And Safety Information
WARNING AND SAFETY INFORMATION General information To ensure safe use of the machine and a proper understanding of the manual it is necessary to be familiar with the terms and typographical conventions used in the documentation. The following symbols are used in the manual to indicate and identify the various types of hazards: WARNING Danger for the health and safety of operators. -
Page 6: Personal Protection Equipment
Personal protection equipment Summary table of the Personal Protection Equipment (PPE) to be used during the various stages of the machine's service life. Stage Protective Safety Gloves Glasses Safety garments footwear helmet ● ○ ○ — — Transport — ● ●... -
Page 7: General Safety Rules
• The A-weighted emission sound pressure level does not exceed 70 dB(A). • Turn the appliance off in case of fault or poor operation. • Do not use products (even if diluted) containing chlorine (sodium hypochlorite, hydrochloric or muriatic acid, etc.) to clean the appliance or the floor under it. •... -
Page 8: Safety Signs To Be Placed Near The Machine Area
To preserve these conditions, the areas around the machine must always be: – kept free of obstacles (e.g. ladders, tools, containers, boxes, etc.); – clean and dry; – well lit. For the Customer's complete information, the residual risks remaining on the machine are indicated below: such situations are deemed improper and therefore strictly forbidden. -
Page 9: Transport, Handling And Storage
Prohibition Meaning Keep the area around the appliance clear and free from combustible materials. Do not keep flammable materials in the vicinity of the appliance Install the appliance in a well-ventilated place to avoid the creation of dangerous mixtures of unburnt gases in the same room Danger Meaning... -
Page 10: Electrical Connection
Electrical connection Before connecting, make sure the mains voltage and frequency match those indicated on the appliance data plate. • Work on the electrical systems must only be carried out by specialised personnel. • Connection to the power supply must be carried out in compliance with the regulations and provisions in force in the country of use;... -
Page 11: Reasonably Foreseeable Improper Use
– go over all stainless steel surfaces vigorously with a cloth moistened with paraffin oil in order to create a protective film. • In case of electrical permanent connection: the device must be lockable in the open position and accessible even after the appliance is installed in its place. A.11 Reasonably foreseeable improper use Improper use is any use different from that specified in this manual. -
Page 12: Machine Disposal
Preventive maintenance • In order to ensure the safety and performance of your equipment, it is recommended that service is undertaken by Electrolux Professional authorised engineers every 12 months, in accordance with Electrolux Professional Service Manuals. Please contact your local Electrolux Professional Service Centre for further details. -
Page 13: Ctechnical Data
Electrolux Professional. subject to local terms and conditions. Warranty does not include scheduled maintenance activities Check on Electrolux Professional website the list of authorized (including the parts required for it) or the supply of cleaning customer care. TECHNICAL DATA Data plate position This instruction manual contains information relevant to various appliances. -
Page 14: How To Interpret The Factory Description
Copyright port personnel. This manual is intended solely for consultation by the operator Manufacturer Electrolux Professional SpA or any other and can only be given to third parties with the permission of service centre authorised by Electrolux Electrolux Professional company. -
Page 15: Responsibility
Operator for an operator who has been informed and an integral part of the manual and therefore must be kept normal trained regarding the tasks and hazards together with it. machine use involved in normal machine use. Customer an operator instructed/trained by the Disposal of packing Care service Manufacturer and who, based on his... -
Page 16: Etransport, Handling And Storage
TRANSPORT, HANDLING AND STORAGE Introduction • make sure the load is stable; • make sure no material can fall during lifting. Manoeuvre Transport (i. e. transfer of the machine from one place to vertically in order to avoid impacts; another) and handling (i. e. transfer inside workplaces) must •... - Page 17 Floor installation options: 3. Against the wall on steel plinth or 1. On steel plinth or adjustable feet 2. On concrete plinth adjustable feet 31,5 / 33,5 / 35,4 in 31,5 / 33,5 / 35,4 in 31,5 / 33,5 / 35,4 in 800 / 850 / 900 mm 800 / 850 / 900 mm 800 / 850 / 900 mm...
-
Page 18: Installation And Connection Diagram
Installation and connection diagram +100/+200 4 5 mm 1,77 in 4 0 mm 7 8 mm 7 8 mm 1,57 in 3,07 in 3,07 in 15 0 mm 13 0 mm 5,91 in 5,12 in +100/+200 4 5 mm 1,77 in EI = Electrical connection EQ = Potential equalisation (x)* = Protective panel... - Page 19 drilling: ø18, depth 145mm 5 0 mm 5 0 mm 1,97 in 1,97 in 13 0 mm 5,12 in 106 mm 4,17 in 106 mm 4,17 in 22 2 mm 8,74 in EI = Electrical connection EQ = Potential equalisation (x)* = Protective panel 15,75 11,81...
-
Page 20: Accessing The Appliance's Internal Components
Accessing the appliance’s internal Access to the main power connection components INSTALLATION AND ASSEMBLY Appliance type • on adjustable feet • on steel plinth • on concrete plinth 3. Free standing • on adjustable feet • on steel plinth • on concrete plinth The appliances are suitable for setting up as single appliances or as a group of appliances. -
Page 21: Before Installation
Before installation • Fastening elements, i.e. drill holes and insert dowels. You can find accompanying notes in the relevant sections on Depending on your model, prepare the following before the G.5 Wall installation. appliance is installed and positioned correctly: • Prepare water, gas and electrical connections and install a shut-off valve, if necessary. -
Page 22: Securing Or Adjusting To The Floor (Optional)
5. Carefully lower the appliance and then move it into the correct position. 6. Remove the outer protective film and the edge covers, taking care not to scratch the surface of the appliance. Very slowly pull off the protective film on the stainless steel surfaces, without ripping, to prevent any adhesive residue. -
Page 23: Fastening Multiple Appliances Together
1. Transport the appliance on its transport pallet directly in front of the point of installation. Bring the lifting cart as close as possible to the appliance. 2. Carefully lift the unit on shelf A of the truck. 3. Remove the transport pallet. 4. -
Page 24: Side Panels And Base Models
Using a solid tool, break nuts C from connecting rail D. Seal the whole length of the joint with long lasting Insert connecting rail D into the gap between the top, silicone (we recommend grey junction sealing, making sure marking E is pointing forwards. code: 059611). -
Page 25: Fixing The Side Panels
Available for appliance Height Width depth (mm, inch) inch inch 31,5″ 33,5″ 35,4″ 100 mm 300 – 2500 mm ● ● 3,94″ 11,81 – 98,43″ Base panel or stainless steel base for mounting back-to-back 200 mm 300 – 2500 mm ●... -
Page 26: Side Cover Without Overhang
Insert the hooks on the bottom of end rail G into the Slide end rail G in the direction of the arrow to align eyelets of the connecting rail. it to the front. G.8.2 Side cover without overhang The side cover should only be used as a closing off against the wall, against a niche and in between appliances (provided that these have the same dimensions). -
Page 27: Sealing
Insert the hooks on the bottom of end rail F into the Slide end rail F in the direction of the arrow to align eyelets of the connecting rail. it to the front. Attach the side of side cover E using the 4 flathead screws supplied. -
Page 28: Potential Equalisation
WARNING When installing multiple appliances, connect them all together through potential equalisation. If the power cable is damaged, it must be replaced by the Cus- 1. 6 mm lug tomer Care Service or in any 2. M6 nut case by specialised personnel, 3. - Page 29 Using 2/1 appliance Using 1/1 appliances I.8.1 Temperature control I.7.1 Temperature control 250℉ — Temperature selection 175℉ — 535℉ Temperature selection 535℉ 1 — 4 Heat levels Standby I.8.2 Heating control Position of heating zone Place the food in the pan. •...
- Page 30 To keep the pan temperature at constant as possible for • Level : boil roasting, choose a high heat setting (6 - I.11 Handrail (optional) I.10 Boiling and braising For correct assembly/disassembly of the handrail, refer to the dedicated installation instructions. To heat liquids, turn temperature control to the right temper- ature and choose the intensity of heat flow with heat control.
- Page 31 J.10 Air filter (optional) If present, remove the air filter at least once a month from under the lower front panel and clean with water and detergent used for manual dishes cleaning. Collecting trays IMPORTANT Non-compliance with the above instruction will •...
- Page 32 Should none of the measures listed below resolve the fault or if an error occurs that is not described here, disconnect the appliance from the mains supply (gas, water, electricity) and immediately contact the Electrolux Professional Customer Care Service. What to do if...
- Page 33 MACHINE DISPOSAL WARNING compressor contains lubricant oil and refrigerant fluid which can be recycled, and that the refrigerator components are Refer to “WARNING and Safety special waste assimilable with urban waste. Information“ The symbol on the product indicates that this product should not be treated as domestic Procedure regarding appliance waste, but must be correctly disposed of in...
- Page 36 Electrolux Professional AG Allmendstrasse 28 CH - 6210 Sursee www.electroluxprofessional.com...
Need help?
Do you have a question about the thermaline 1/ GN and is the answer not in the manual?
Questions and answers