Screen Data Check - Omron NS10-TV Series Setup Manual

6-7 Screen Data Check

6-7 Screen Data Check

Registered screens (numbers 0 to 3,999) can be displayed and checked using operations
from the System Menu.
Reference
Display check screens by using the following procedure from the System Menu.
1. Select the Data Check Tab.
2. Set the screen number and press the Display Button to display the screen as a sample.
3. Press the ON Button next to the Show Address heading and display the sample screen to display
the set address instead of the functional object label.
At this point you can also switch between displaying or not displaying the host name by setting
Show Host Name to ON or OFF.
4. Press any part of the sample screen that is displayed to return to the Screen Data Check Screen.
Reference
6-48
• The screen displayed when checking screen data is a sample and cannot be used to
communicate with the host. The flicker function is also disabled.
• Only the user screens (0 to 3,999) can be displayed. System screens cannot be dis-
played.
Addresses are not displayed for data block tables.