Omron NS10-TV Series Setup Manual page 94

3-7 Installing the Video Input Unit
Removing the Video Input Connector
1. Unlock the BNC socket on the camera's video output cable by twisting it counterclock-
wise while pushing it.
2. After unlocking the BNC socket, pull it out.
Note
3-40
Push
Pull out
If the camera's video output cable uses an RCA plug, connect it to the video input
connector using a BNC-RCA connector in the way shown below.
Video input connector
(BNC type)
BNC - RCA connector (See note.)
RCA plug
A BNC-RCA connector is provided with the Monitor Cable (F150-VM) for OMRON Vision
Sensors. It is not provided with the Video Input Unit (NS-CA001).
Twist counterclockwise