Using The System Menu - Omron NS10-TV Series Setup Manual

6-1-4

Using the System Menu

Information on using the menus, such as displaying the System Menu, and selecting menu
items, is provided here.
Reference
Displaying the System Menu
The System Menu can be displayed by using any of the following methods.
1. Press two of the four corners of the touch panel simultaneously (NS12/10/8/5 only).
2. Press one of the four corners of the touch panel twice in a row (NS15 only).
3. Press the command button in the System Menu display.
4. Press a command button set to switch the screen to the system menu.
5. Specify screen number 4002 BCD (FA2 binary) and switch the screen.
6. Press or change the value of a Multifunction Object set to display the System Menu.
1. Pressing the Corners of the Touch Panel (NS12/10/8/5)
The System Menu can be displayed by pressing two of the four corners of the PT touch
panel simultaneously, as shown in the following diagram.
When pressing the corners of the touch panel, however, first press a corner that does not
have a functional object displayed. If the position of a functional object is pressed, its function
will be performed. If the command button for switching screens is kept pressed after the
screen has been switched, it will be detected as if the button has been released.
The system settings set in the project data are given priority over those set in the System
Menu.
6-1 Operating Modes and System Menu
6-7