Orientation; Changing Values In Device Monitor Setting; Contrast (Ns5-Sq@@/Ns5-Mq@@ Only) - Omron NS10-TV Series Setup Manual

1. Select Color Print, Monochrome Print, or Monochrome Print (Inverse) in Print Type.
2. After setting, press the Write Button to save the setting.
6-3-9

Orientation

Select the printing orientation of the printer that will be connected to the NS-series PT.
1. Select either Portrait or Landscape in Orientation.
Portrait (See note 1.): Prints with the longer page measurement as the height (factory
default).
Landscape: Prints with the shorter page measurement as the height.
2. After setting, press the Write Button to save the setting.
Note 1: If PictBridge is selected, system version 8.4 or higher is required to change these settings.

6-3-10 Changing Values in Device Monitor Setting

This setting enables using the registered monitor and switch box functions of the device
monitor only for monitoring by prohibiting address changes while monitoring.
Disable Button: Prohibits changing monitor values
Enable Button: Enables changing monitor values (factory default)
This setting can also be made with the CX-Designer on the PT Operation Tab Page of the
System Settings.

6-3-11 Contrast (NS5-SQ@@/NS5-MQ@@ Only)

This function adjusts the screen contrast. Contrast can be adjusted in 100 degrees.
Adjust the contrast by using operations from the PT Tab Page in the System Menu, as fol-
lows:
6-3 PT Settings
6-29