Omron MX2 User Manual page 72

Using the Front Panel Keypad
50
[Setting example]
After power ON, changing from 0.00 display to change the b083
(carrier frequency) data.
Press
key to show
the function code
d001
Press
F001
Press
b001
Press Up key to change increase function code
b083
Note Function code bxxx are for monitor and not possible to change.
Function codes Fxxx other than Fxxx are reflected on the performance just
after changing the data (before pressing
no blinking.
When a function code is shown...
key Move on to the next function group
key Move on to the data display
key Increase function code
key Decrease function code
Note Keep pressing for more than 1 second leads to d001 display, regardless the
display situation. But note that the display will circulates while keep pressing
the key because of the original function of the key.
(e.g. F001 –> A001 –> b001 –> C001 –> ... –> displays 50.00 after 1 second)
Data of
d001
display after the first power ON
0.00
key to move on to the function group
key twice to move on to the function group b001.
Press key to display the data of
.
5 0
.
12 0
key to set
Press
and save the data
: Fix and stores the data and moves back to the function code
: Cancels the change and moves back to the function code
Section 2-5
will be shown on the
F001
(b001 –> b083).
b083
Display is solid lighting.
Press up key to increase the
data (5 . 0 –> 12 . 0)
When data is changed, the display
starts blinking, which means that new
data has not been activated yet.
key), and there will be
When a data is shown...
Cancels the change and moves
back to the function code
Fix and stores the data and
moves back to the function code
Increase data value
Decrease data value