Installation; Installation Environment Clearance; Otherwise, There Is The Danger Of Fire; The Specifications In The Text (Chapter 1, Specifications Tables). Otherwise, It - Omron MX2 User Manual

Step-by-Step Basic Installation
!Caution Be sure not to let the foreign matter enter vent openings in the inverter hous-
!Caution Be sure to install the inverter in a place that can bear the weight according to
!Caution Be sure to install the unit on a perpendicular wall that is not subject to vibra-
!Caution Be sure not to install or operate an inverter that is damaged or has missing
!Caution Be sure to install the inverter in a well-ventilated room that does not have
2-3-1

Installation

2-3-2

Installation Environment clearance

28
ing, such as wire clippings, spatter from welding, metal shavings, dust, etc.

Otherwise, there is the danger of fire.

the specifications in the text (Chapter 1, Specifications Tables). Otherwise, it

may fall and cause injury to personnel.

tion. Otherwise, it may fall and cause injury to personnel.
parts. Otherwise, it may cause injury to personnel.
direct exposure to sunlight, a tendency for high temperature, high humidity or
dew condensation, high levels of dust, corrosive gas, explosive gas, inflamma-
ble gas, grinding-fluid mist, salt damage, etc. Otherwise, there is the danger of
fire.
Install the Inverter vertically on a wall.
Install the Inverter on a nonflammable wall surface material, like metal.
Other installations are not possible due to heat convection design of the
inverter is vertical.
Make sure the ambient temperature remains within the rated range (−10 to
50°C). Take note that if the ambient temperature reaches or exceeds 40°C,
the carrier frequency and output current must be derated (check derating
tables per each inverter model in Derating Curves on page 9). If the Inverter is
Section 2-3