Changing Display Refresh Periods - Omron K3HB-H User Manual

5.28 Changing Display Refresh Periods

2
d. ref
L
(D.REF)
When measurement values change rapidly and the display changes with
the measurement values, flickering often occurs and the display becomes
difficult to read. The flickering can be suppressed and the display made
easier to read in such situations by delaying the display refresh period.
The display refresh period is set using the following parameter.
Parameter
Display refresh period
d.ref
Parameter Setting Procedure
A Press the L [LEVEL] Key for at least
3 s in RUN level to move to the initial
setting level.
0" is displayed on the level/bank
• "
L
display to indicate the initial setting level.
B Press the L [LEVEL] Key several
times to move to the display adjustment
level.
2" is displayed on the level/bank
• "
L
display.
C Press the M [MODE] Key to change
the PV display to "d.ref."
D Press the S [SHIFT] Key to make the
SV display flash.
• The setting can be changed when the
SV display starts to flash.
E Use the U [UP] Key to change the set
value.
F Press the M [MODE] Key to switch to
the next parameter.
• The set value is registered.
5.28 Changing Display Refresh Periods
Display adjustment level
Set value Meaning of set value
off
Every 50 ms
0. 5
Every 0.5 ms
1
Every 1 s
2
Every 2 s
4
Every 4 s
L
3 s min.
L
M
S
U
M
X V S H
0
L
0."
Displays "
L
sv. dsp
2
L
off
2."
Displays "
L
d. ref
2
L
off
d. ref
2
L
off
d. ref
2
L
2
color
2
L
grn-r
5-73