Omron K3HB-H User Manual page 183

Section 6 User Calibration
■ Key Operation Procedure
Moving to Calibration
Level
Operation in
Calibration Level
6-6
Perform the operation according to the following procedure.
Parameter Setting Procedure
A Move to the advanced function setting level, press the M [MODE]
Key several times and display the "cmov" parameter to move to
the calibration level.
• The parameter character is "c
B Press the S [SHIFT] Key to make the SV display flash.
• The parameter can be changed when the SV display starts to
flash.
C Use the U [UP] and S [SHIFT] Keys to set the password. The
password is "1201"(1201).
D Press the M [MODE] Key to write the password.
• If the password is correct, the Unit moves to the calibration level.
• If the password is incorrect, the Unit remains in the advanced
function setting level and the next parameter is displayed.
Move to the calibration level.
cmoV
0
To next parameter
(Does not move to the calibration level.)
Calibration level
Parameter Operation Procedure
A Follow the steps outlined above to
move to the calibration level.
• The aging timer is displayed.
• The aging timer is a 30-minute
countdown timer that counts until 0 is
reached.
• A calibration record mark will be
displayed if a user calibration history
exists.
ov."
m
The set value is always 0 after moving
from character display to monitor status.
Change status
cmoV
0
Use the S[SHIFT]
and U[UP] Keys
to set the password.
Password doesn't match.
Password matches.
Set value initialization
adj
u
30
adj
u
L
30
u."
Displays "
L
.
adj
u
L
30
Calibration
record mark