Using Prescale/Comparative Set Value Banks - Omron K3HB-C User Manual

5.30 Using Prescale/Comparative Set Value Banks

The K3HB has 8 banks where groups of prescale values and comparative set values can be set in
advance. Prescale values and comparative set values can be changed easily by switching these banks.
This function is called "bank selection."
Explanation of Functions
Prescale values AX, AY, BX, and BY and comparative set values HH, H, L, and LL (5, 4, 3, 2, and 1) are
set into banks. Prescale values and comparative set values can be set to all 8 banks, numbered 0 to 7.
Banks can be selected using front panel keys or an event input.
* If the bank copy function is used, the prescale values or comparative set values set to one bank can be
copied to all banks.
■ 1. Specifying the Bank Selection Method
f
bnk-c
L
(BNK-C)
Applicable models:
K3HB-@@@-@@2
K3HB-@@@-@@4
5.30 Using Prescale/Comparative Set Value Banks
Advanced function setting level/Prescale level/Comparative set value level
Bank selection
Before banks can be selected, the bank selection method must be
specified. The bank selection function is enabled when the selection
method is specified. The individual bank settings cannot be made until
bank selection is enabled.
The bank selection method is set using the following parameter.
Parameter
Bank selection
bnk-c
*1. With this setting, banks cannot be selected using event inputs.
*2. With this setting, banks cannot be selected using key operations.
Event inputs can be used only for models with connectors.
The relationship between event input (BANK1, BANK2, and
BANK4) ON/OFF status and the bank number is shown below.
Bank No.
0
1
2
3
4
5
6
7
Set value Meaning of set value
off
Bank selection disabled
key
Bank selection using keys
ev
Bank selection
using event input (*2)
External terminals
BANK1 BANK2
OFF OFF
ON OFF
OFF ON
ON ON
OFF OFF
ON OFF
OFF ON
ON ON
R P C
(*1)
BANK4
OFF
OFF
OFF
OFF
ON
ON
ON
ON
5-75