Omron K3HB-C User Manual page 127

Section 5 Functions and Operations
● Maximum and Minimum Value Interruption Memory
5-66
This function can be used to hold the maximum and minimum values
during power interruptions. The settings are hold and don't hold.
This function enables fluctuation management using the maximum and
minimum values even if the device should momentarily stop.
* "5.22 Holding Measurement Values"
Max./Min.
value
Power supply
* Values are held even in overflow or no-measurement status.
* Values are held even if a software reset is performed by key
operations or communications.
* The interruption memory cannot be used if the startup compensation
timer is enabled when the power is turned ON.
Remarks
"5.22 Holding Measurement Values"
"5.24 Changing Normal Display Values to Maximum and Minimum
Values" P.5-67
P.5-63
Held Reset
OFF ON
P.5-63