Changing Display Colors - Omron K3HB-C User Manual

5.26 Changing Display Colors

2
color
L
(COLOR)
0
L
Displays "L 0."
sv. dsp
2
L
off
Displays "L 2."
color
2
L
grn-r
color
2
L
grn-r
color
2
L
red-g
The PV display color can be switched when the comparative result
changes from PASS to HH, H, L, or LL, or when an input error occurs
during operation in RUN, adjustment, or protect levels.
This function is called "display color selection." The color switching
pattern is set using the following parameter.
Parameter
Display color selection
color
* Comparative output HH, H, L, or LL or input error status
K3HB-R/P:
OFF: All comparative outputs HH, H, L, and LL are OFF and no input error.
ON: HH, H, L, or LL comparative output is ON or input error.
K3HB-C:
OFF: All outputs 1 to 5 are OFF and no input error.
ON: One of outputs 1 to 5 is ON or input error.
Parameter Setting Procedure
A Press the L [LEVEL] Key for at least 3 s in RUN level to move to
L
the initial setting level.
3 s min.
0" is displayed on the level/bank display to indicate the initial
• "
L
setting level.
B Press the L [LEVEL] Key several times to move to the display
L
adjustment level.
2" is displayed on the level/bank display to indicate the
• "
L
display adjustment level.
C Press the M [MODE] Key to change the PV display to "color."
M
D Press the S [SHIFT] Key to make the SV display flash.
S
• The setting can be changed when the SV display starts to
flash.
E Use the U [UP] Key to change the set value.
U
5.26 Changing Display Colors
Display adjustment level
Set value Status*
grn-r
OFF
ON
grn
OFF
ON
red-g
OFF
ON
red
OFF
ON
R P C
PV display
color
Green
Red
Green
Red
Green
Red
5-69