Omron H3DE Manual page 14

Specifications
■ General
Item
Operating mode
Operating/Reset method
Terminal block
Terminal screw tightening torque 0.98 N·m max. {approx. 10 kgf·cm max.}
Output type
Mounting method
Attachment
Approved standards
Note: Can be mounted to 35-mm DIN track with a plate thickness of 1 to 2.5 mm.
■ Time Ranges
Time scale display
(see note 1)
x 0.1 0.1 to 1.2 s
x 1 1 to 12 s
Note: 1. Time scale display is applied commonly for ON and OFF time.
2. When the main dial is set to "0" for all settings, the output will operate instantaneously.
■ Ratings
Rated supply voltage (see note)
Operating voltage range
Power reset
Reset voltage
Power consumption
Control output
Ambient temperature
Ambient humidity
Note: DC ripple rate: 20% max.
B-64
Solid-state Twin Timer
Flicker-OFF/Flicker-ON start
Time-limit operation/Time-limit reset or self-reset
2
Clamps two 2.5 mm max. bar terminals without sleeves
Relay: SPDT
DIN track mounting (see note)
Nameplate
UL508, CSA 22.2 No.14
Conforms to EN61812-1, IEC60664-1 4 kV/2, VDE0106/P 100
Output category according to IEC60947-5-1 (AC-13; 250 V 5A/AC-15; 250 V 3 A/DC-13; 30 V 0.1 A)
sec
1 to 12 s
10 to 120 s
24 to 230 VAC/VDC (50/60 Hz)
85% to 110% of rated supply voltage
Minimum power-off time: 0.1 s
2.4 VAC/DC max.
AC: Approx. 3.1 VA (1.8 W) at 230 VAC
DC: Approx. 0.8 W at 24 VDC
Contact output: 5 A at 250 VAC with resistive load (cos = 1)
Operating: 10 C to 55 C (with no icing)
Storage: 25 C to 65 C (with no icing)
Operating: 35% to 85%
H3DE-F
H3DE-F
Time unit display
10 s
0.1 to 1.2 min
1 to 12 min
5 A at 30 VDC with resistive load (cos = 1)
min hrs
0.1 to 1.2 h
1 to 12 h