Ingenico Lane 3000 Manual page 63

Pushing Forms/Package Updates to Selected Ingenico TETRA Devices
Using UTG Stand Alone
To push forms/package updates to selected Ingenico TETRA devices, complete the following steps:
Complete the first three steps in the
Do not create or include the Update.txt file. Without the Update.txt file, the forms will not automatically
•
load.
Place the forms package in the normal update directory.
•
With the UTG Stand Alone running, right-click anywhere on the Stand Alone screen to display the Device
•
Maintenance window.
In the Device Maintenance window, click Device Maintenance.
•
• From the listed devices, select the desired PIN pads.
Click Push Forms to push the forms/package updates to the selected PIN pads while the UTG is running.
•
UTG Automatic Form Loading and UPP Update
Document v4.2 | UTG v3223+
© 2024 Shift4. All rights reserved.
External Use NDA
Page 63 of 68
Using Ingenico Tetra External Devices
section.