Read Setting Data - Omron E5ZN Operation Manual

Commands and Responses
5-9-2

Read Setting Data

Command
Response
Variable
type Address
MRC SRC
"01" "01"
Variable Address
type
"C1" "0000" to "0019"
"0100" to "0119"
"C3" "0000" to "003E"
"0100" to "013E"
"C5" "0000"
"0100"
"C7" "0000" to "0001"
"0100" to "0101"
This command reads setting data. If the number of elements is set between
"2" and "6", consecutive address setting data can be read.
Refer to 5-10 Variable Area Map for information on specifying variable types
and addresses.
This command can be used in either setting area 0 or 1.
Response code
MRC SRC
"01" "01" "0000"
Response code: The code shown above represents normal completion. For
details on the response code, refer to 5-5 Read from Variable Area .
Bit No. of
position elements
"00" "0001"
Setting data
ch
1 Setting data for setting area 0
2
1 Setting data for setting area 1
2
1 Setting data for setting area 0
2
1 Setting data for setting area 1
2
Data
Status
Section 5-9
Description
75