Part Names and Functions
3-1-4
Installation
Panel Cutout Dimensions
Installation Procedure
3-4
E5AR
+0.8
92
0
110 or higher
1. If the front of the Controller
needs to be watertight, attach
the provided watertight pack-
ing.
If the front of the Controller
does not need to be watertight,
the watertight packing does
not need to be attached.
2. Insert the Controller into the
cutout in the panel.
3. Insert the accompanying fit-
tings into the grooves on the
top and bottom of the rear
case.
4. Gradually tighten the screws in
the top and bottom fittings, al-
ternating between each so that
they are balanced. Tighten un-
til the ratchet turns without en-
gaging.
E5ER
+0.6
45
0
60 or higher
E5AR
(1) Watertight packing
(1) Watertight packing
(Model Y92S-P4)
A R
(2)
E 5
(3)
(4)
Section 3-1
E5ER
(Model Y92S-P5)
(2)
E R
E 5
(3)
(4)