Omron E5AK User Manual page 94

CHAPTER 5 PARAMETERS
Setup Mode
Input type
• Sets the sensor type by the code.
Function
• Set the code according to the following table. Default is "2: K1 thermocouple".
Comment
F Related article
3.2 Setting Input Specifications (page 3-4)
F Related parameters
See
When input type is set to temperature input:
"_C/_F selection" (setup mode)
When input type is set to voltage input or current input:
"Scaling upper limit" "Scaling lower limit" "Decimal point" (setup mode)
5--26
Set value
0 JPt -199.9 to 650.0 (_C)
1 Pt -199.9 to 650.0 (_C)
2 K1 -200 to 1300 (_C)
3 K2 0.0 to 500.0 (_C)
4 J1 -100 to 850 (_C)
5 J2 0.0 to 400.0 (_C)
6 T -199.9 to 400.0 (_C)
7 E 0 to 600 (_C)
8 L1 -100 to 850 (_C)
9 L2 0.0 to 400.0 (_C)
10 U -199.9 to 400.0 (_C)
11 N -200 to 1300 (_C)
12 R 0 to 1700 (_C)
13 S 0 to 1700 (_C)
14 B 100 to 1800 (_C)
15 W 0 to 2300 (_C)
16 PLII 0 to 1300 (_C)
17 4 to 20mA
18 0 to 20mA
19 1 to 5V
20 0 to 5V
21 0 to 10V
Input Type
/-199.9 to 999.9 (_F)
Platinum resistance thermometer Platinum resistance thermometer
/-199.9 to 999.9 (_F)
/-300 to 2300 (_F)
/0.0 to 900.0 (_F)
/-100 to 1500 (_F)
/0.0 to 750.0 (_F)
/-199.9 to 700.0 (_F)
/0 to 1100 (_F)
/-100 to 1500 (_F)
/0.0 to 750.0 (_F)
/-199.9 to 700.0 (_F)
/-300 to 2300 (_F)
/0 to 3000 (_F)
/0 to 3000 (_F)
/300 to 3200 (_F)
/0 to 4100 (_F)
/0 to 2300 (_F)
Thermocouple Thermocouple
Current input Current input
Voltage input Voltage input