Omron E3S-C Datasheet

Oil-resistive, compact photoelectric sensor in metal housing
E3S-C
Meets IP67/IP67G (oil tight) and NEMA 6P
standards water/oil resistance
E3S-C meets the IP67 requirements of the IEC standards and
6P of the NEMA standards. E3S-C can be used worry-free in
automotive assembly lines and other production lines where
oil vapor exists. It can also be applied to food processing lines
because it resists hydrogen peroxide, detergent and potassi-
um hydroxide.
High shock resistance of 1,000 m/s
The industry's top-class photoelectric sensor features shock re-
2
sistance of 1,000 m/s , which is as high as that of a proximity sen-
sor at rated values, and vibration resistance of as high as 10 to
2,000 Hz.
Lineup of M12 metal connector joint type models
Lineup of water/oil/shock-resistant M12 metal connector joint
type models are available. This series ensures ease of sensor
replacement during maintenance.
E3S-C
Features
NPN/PNP output selector
The operation panel has the NPN/PNP out-
put selector. You need not prepare two
NPN and PNP models for export. You need
not worry about malfunctions due to noise,
either.
Mutual interference prevention enhanced
2
(Retroreflective, diffuse reflective models)
Fuzzy inference is introduced into the mutual interference pre-
vention for the first time in the industry. This prevents a mal-
function due to mutual interference, enabling two sensors to
be mounted closely side by side.
Easy optical axis alignment
OMRON's original "automatic position compensation system"
minimizes misalignment of mechanical and optical axes to
merely ±2°. The optical axis is aligned perfectly by only install-
ing the sensor.
A-101