Advertisement
Reflectors
Name
Sensing distance (typical)
Reflectors
Small reflector
Tape Reflector
* Values in parentheses indicate the minimum required distance between the sensor and reflector.
Note: 1 . When the reflector used is other than the supplied one, set the sensing distance to about 0.7 times of the typical example as a guideline.
Mounting Brackets
Shape
Model
E39-L102
E39-L103
E39-L85
E39-L86
E39-L87
Note: If a through-beam model is used, order two Mounting Brackets for the emitter and receiver respectively.
Sensor I/O Connectors
Cable
Straight
Standard cable
L-shaped
E3S-C
3 m (rated value)
4 m
1.5 m
750 mm
700 mm (50 mm) *
1,100 mm (100 mm) *
1,400 mm (100 mm) *
Quantity
1
Attached to the horizontal model.
1
Attached to the vertical model.
Mounting bracket designed to switch from
1
E3S-#####42, 44 to the vertical model of
E3S-C.
Mounting bracket designed to switch from
1
E3S-#####43 to the vertical model of E3S-
C.
1
Shape
2 m
5 m
2 m
5 m
Model
Quantity
E39-R1
1
Attached to the Retroreflective E3S-CR#1 (-M1J).
E39-R2
1
E39-R3
1
E39-R4
1
E39-RS1
1 pc.
E39-RS2
1 pc.
The M.S.R. function is available.
E39-RS3
1 pc.
Remarks
---
Cable length
3-wire type
Remarks
---
---
---
Model
XS2F-D421-DC0-A
XS2F-D421-GC0-A
XS2F-D422-DC0-A
XS2F-D422-GC0-A
A-103
Advertisement
