80 to 100 mA Photoelectric Sensor E3S-G Grooved Head Sensors with Built-in DC Amplifiers A 1-cm groove type detects marks on transparent film. A 3-cm groove type detects edges, labels, and marks. LIGHT and STABILITY indicators make sensitivity adjustment easy.
E3S-GS1RE4A/ E3S-GS1GE4A/ E3S-GS3E4/ E3S-GS1B4 E3S-GS1RB4A E3S-GS1GB4A E3S-GS3B4 Power supply voltage 12 to 24 VDC, ripple (p-p): 10% max. 12 VDC –10% to 24 VDC +10%, ripple (p-p): 10% max. Current consumption 40 mA max. Sensing distance 1 cm 3 cm...
Page 3
E3S-G E3S-G Operation Output Circuits E3S-GS1E4 (NPN Output) E3S-GS1B4 (PNP Output) E3S-GS1RE4A (NPN Output) E3S-GS1RB4A (PNP Output) E3S-GS1GE4A (NPN Output) E3S-GS1GB4A (PNP Output) Light- Dark- Light- Dark- Brown Blue Brown Blue Output Output Black Black Black Black Main circuit Main circuit...
Page 5
E3S-G E3S-G Dimensions Note: All units are in millimeters unless otherwise indicated. E3S-GS1 4 Cord: 4-mm dia., 18/0.12, 3-conductor Standard length: 2 m Weight: approx. 100 g Indicator SENSITIVITY adjuster 10.3 Mounting Holes 12.5 Two M5 holes Two, 5.5 dia. holes Optical axis 13.5...
Page 6
E3S-G E3S-G Installation Connections Relay Load Note: By connecting the brown (red) and blue (black) wires conversely, the load operates when there is incident light. Operating load Light-ON condiction Connection method Brown Blue 12 to 24 V 80 mA max.
Page 8
E3S-G E3S-G ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. E036-E1-2 In the interest of product improvement, specifications are subject to change without notice.
This manual is also suitable for:
E3s-gs1e4E3s-gs1re4E3s-gs1ge4E3s-gs1b4E3s-gs1rb4E3s-gs1gb4...
Show all
Need help?
Do you have a question about the E3S-G and is the answer not in the manual?
Questions and answers