Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Zonestar Manuals
  4. 3D Printers
  5. Z9V5Pro
  6. User manual

Zonestar Z9V5Pro User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Z9V5Pro FDM 3D Printer
(Z9V5Pro-MK5)
User Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the Z9V5Pro and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Zonestar Z9V5Pro

Summary of Contents for Zonestar Z9V5Pro

  • Page 1 Z9V5Pro FDM 3D Printer (Z9V5Pro-MK5) User Manual...

  • Page 2: Specifications

    !! ATTENTION !! ◆ Please put the printer away from kids. ◆ Must be guided by adults when children are installed or used. ◆ Hot end and hot bed may be very hot even if the 3d printer stop working. ◆...

  • Page 3: Parts List

    Parts List NOTE We suggest to check the accessories one by one according to the list when unpacking. Bottom Aluminum heating platform assembly assembly Magnetic hotbed sticker Profiles cover Testing filament AC power cord Hot end Z carrier assembly Assembly Left Filament holder...

  • Page 4: Installation

    Installation Type A: M4x36 Type A: M4x36 Type B: M5x22 Type B: M5x22 Type C: M4x18 8* Type B Type C Fix the top assembly with the Z axis profiles. Type B Type B Type B Type B *NOTE: Keep the y-axis aluminum profiles aligned with the z-axis aluminum profiles. Install the hotbed bracket on the Z-axis carriers.
  • Page 5 Installation The cable of the hot bed should be placed in the Install the control panel on the front/bottom rear/right corner of the machine. profile, fix this screw. Use a wrench to adjust the eccentric column on Loosen the 3 PCS M3 screws on the back of hot- the X carrier, let it can move smoothly and end assembly, then mount the hot end to the X without shaking.
  • Page 6 Wiring Heatbed Z motor (Z-L) Control Panel Heatbed Z motor (Z-R) NOTE 1. Make sure all of the connectors are connected properly before power on. 2. The left Z Motor/ZSW and right Z Motor/ZSW are paired. if the z-axis limit switch is triggered but the Z motor doesn’t stop when did HOME All(or HOME Z), please try to exchange the wiring of ZSW(Z-L) and ZSW(Z-R) and check again.

  • Page 7: Operation

    POWER ON Plug in AC power cord and turn Push and Hold the DC power button 5 seconds on the AC power switch until LCD shows “ZONESTAR” Logo POWER OFF Do “Power OFF” Wait the LCD screen turn Turn OFF AC power...
  • Page 8 Build your first works Step1: Bed leveling 1. Tighten the hand nuts under the bed to move the hot bed to the lower position (Fig 1). Do “Prepare>>Auto Home>>Home All” on control panel, wait the hot end go to the HOME (origin) position. 2.

  • Page 9: Advance Features

    Download the slicing software to your PC or laptop and unzip it, find PrusaSlicer execute file, click to run it. It will start to work a “Configuration wizard”, choose “Zonestar FFF” and “Z9/0.4mm”, click “finish”. Choose “Zonestar Z9 + M4 HOTEND” on printer settings.

  • Page 10: Warranty Conditions

    12 months from the date of original purchase (“Warranty Period”). If a defect arises and a valid claim is received within the Warranty Period, ZONESTAR will, at its option, 1) repair the product by using...

This manual is also suitable for:

Z9v5pro-mk5