Omron CX-ONE - INTRODUCTION GUIDE Introduction Manual page 37

Online Debug on Reading
a Machine
Move the cursor to D100
of input parameters
Right-click, then select
[Set/Reset (S)] > [Value
(V)] from the pull-down
menu
or
Double-click
Or
ENT
Online
Connection
Project
to PLC
Monitoring -2 Changing the Current Parameter Value
Monitoring -2 Changing the Current Parameter Value
Change the current value of contact or channel through conductive monitoring.
Transferring
Program
to a
Debug
Machine
Change current value of the input parameter.
Click
Ensure to add "#" (hexadecimal/BCD)
or "&" (decimal) to the left of the value.