Related Manuals for USX-MOUNT XAS702-01
Summary of Contents for USX-MOUNT XAS702-01
- Page 1 XAS702-01 INSTRUCTION MANUAL If you have any questions along the way, just give us a call 1-800-460-0956 or message to us.We’re ready to help! USA-B0...
- Page 2 Before getting started, let’s check below lists to make sure it is just right for you! ≤406mm/16" Yes --- Perfect! Is the width of your wall plate 16" or No --- This mount is NOT compatible. less than 16"? Does your TV CAUTION: DO NOT exceed the maximum weight (including indicated.
- Page 3 WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.
- Page 4 1-1 Select TV Screws...
- Page 5 1-2 Wall plate bar 与电视架组装 Wall Plate Unit...
- Page 6 CAUTION: Avoid potential personal injury or property damage! ● Drywall covering the wall, must not exceed 5/8 in. (16 mm) ● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm) ●...
- Page 7 3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. IMPORTANT: Pilot holes must be drilled to a depth of 2.5 in. (64 mm). Be sure to drill into the center of the studs. 4. Install wall plate using four lag bolts and four washers .
- Page 8 Before hanging TV, please try to pull the mount to make sure that it has been assembled on the wall tightly.
- Page 9 Locate the wall mount unit by sliding left or right then tighten Bolts with Allen Key lock the mount at desired position.
Need help?
Do you have a question about the XAS702-01 and is the answer not in the manual?
Questions and answers