Subscribe to Our Youtube Channel
Related Manuals for USX-MOUNT XAS004-01
Summary of Contents for USX-MOUNT XAS004-01
- Page 1 XAS004-01 INSTRUCTION MANUAL If you have any questions along the way, just message to us. We’re ready to help! USA-B2...
- Page 2 CAUTION: PLEASE READ ENTIRE MANUAL PRIOR TO USE AND SAVE THESE INSTRUCTIONS Before getting started, let’s check below lists to make sure it is just right for you! CAUTION: DO NOT exceed the maximum weight Does your soundbar No? Perfect – you may continue. Max: indicated.
- Page 3 Dimensions Product dimensions 40mm [1.57in] [0.28in] 380mm 426mm [14.96in] [16.75in] 200mm [7.87in] 35mm 40mm [1.57in] [1.38in] 84mm [3.31in] 103mm [4.06in] 250mm [9.84in] 27mm [1.08in] 118mm [4.63in] [0.28in] FRONT VIEW 200mm 400mm 600mm 1000mm 600mm 800mm...
-
Page 4: Parts And Hardware
Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. - Page 5 Hardware for Soundbar Installation Hardware for TV Screws Spacers Washers soundbar M6x16mm M6x25mm 8x10mm M4x16mm Key Hole Bolt M8x20mm M8x30mm 2.5mm M5x16mm...
- Page 6 STEP 1 Pre-assemble Soundbar Brackets Option 1 Soundbar Brackets with Hook Option 2 Soundbar Brackets with Hook The Effects of Brackets Assemble Tips: The horizontal distance of the brackets depends on your TV VESA.
- Page 7 STEP 2 Disassemble Your TV from the Mount Ⅰ Remove all cables Ⅱ Take off the TV Ⅲ Remove the TV from the mount brackets from your TV...
- Page 8 STEP 3 Attach the Assembled Soundbar Brackets Unit to Your TV Option 1 Option 2 Option 3 Option 1 Option 2 Option 3 Tips: No need to use washer (g) when using M8 screw (b/d). Tips: Before attach the TV, check the vertical distance of TV and bracket.
- Page 9 STEP 4 Hang the Whole Assembled Unit to the Mount...
- Page 10 STEP 5-1 Option 1 Attach Soundbar for back mounting holes Put the soundbar on the hook (you can adjust the position of hook), and fully fasten bolts and washers of soundbar as shown below. Tips:The position of hook depends on the bottom hole of soundbar. Tighten Loosen...
- Page 11 STEP 5-2 Option 2 Attach Soundbar for bottom mounting holes Attach the soundbar to the hook (you can adjust the position of hook), and fully fasten bolts & nuts and washers of soundbar as shown below. Tips:The position of hook depends on the back hole of soundbar. Tighten Loosen Option B Key Hole...
- Page 12 STEP 5-3 Option 3 Attach Soundbar without assembly holes Put the soundbar on the hook (you can adjust the position of hook), and use hook and Loop to secure the soundbar as shown below. Tips:The position of hook depends without assembly holes. Tighten Loosen Hook and Loop...
Need help?
Do you have a question about the XAS004-01 and is the answer not in the manual?
Questions and answers