Page 1
XAS301 INSTRUCTION MANUAL For 26-55" TV If you have any questions along the way, just give us a call 1-800-460-0956 or mail to customerservice@x-mount.com. We’re ready to help!
Page 2
Before getting started, let’s check below lists to make sure it is just right for you! MAX:400mm/15.74" (MIN:75mm/2.95") Check your TV VESA is within No? This mount is NOT compatible. Min and Max size MAX:400mm/15.74" (MIN:75mm/2.95") Yes? Perfect ! CAUTION: DO NOT exceed the maximum weight Does your TV indicated.
Page 3
TV INTERFACE MAX:400mm [15.75in] MIN:75mm [2.95in] MAX:400mm MIN:75mm [2.95in] [15.75in] TOP VIEW-RETRACTED SIDE VIEW - RETRACTED 430mm [16.93in] 3° 576mm 262mm 726mm 0° [10.31in] [28.58in] [22.67in]...
Page 4
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.
Page 5
Parts and Hardware for STEP 2 Upper Column Glass Base Lower Column Plastic Sleeve M6x10mm M6x10mm M8x30mm Iron Sheet TV-Plate Washer Bolt Bolt Bolt...
Page 6
1-1 Choose Configuration ⑤ ③ ③ ⑤ ① 75X75 ⑥ ⑥ ④ ② ② ④ ② 100X100 ① ① ⑥ ③ 100X200 150X150 ④ 200X100 ① ① ④ ② ② ④ ⑤ 200X200 ⑥ ⑥ ⑤ ③ ③ ⑤ ⑦ ⑦...
Page 8
1-3 Select TV Screws 1-4 Need Spacer? No, go to PAGE 9 for detailed combination. Short Screw Bracket Washer TV back Yes, go to PAGE 9 for detailed combination. Long Screw Washer Spacer Bracket TV back...
Page 9
1-5 Attach the TV Plate Screw and washer Spacer(s), screw(s) and washer(s)
Page 10
Assemble the columns ( ) with Bolt .Install it on the glass base through iron sheet and plastic sleeve with screw...
Page 11
As the TV height you desired screw bolt into right holes.
Page 12
4-1 TV Tilting adjustment (+3°): If you need tilt TV,you can loosen the bolts below and tilt up +3° Then tighten the bolts. +3°...
Page 13
4-2 Height Adjustment If the TV height is not suitable, you can adjust the height by following the steps below.
Need help?
Do you have a question about the XAS301 and is the answer not in the manual?
Questions and answers