Subscribe to Our Youtube Channel
Related Manuals for USX-MOUNT XMM904
Summary of Contents for USX-MOUNT XMM904
- Page 1 XMM904 INSTRUCTION MANUAL Please read this manual carefully If you have any questions along the way, just message to us. We’re ready to help! USA-D0...
- Page 2 CAUTION: PLEASE READ ENTIRE MANUAL PRIOR TO USE AND SAVE THESE INSTRUCTIONS Before getting started, let’s check below lists to make sure it is just right for you! MAX:400mm/15.75" (MIN:75mm/2.95") Check your TV No? This mount is NOT compatible. VESA is within Min and Max size MAX:400mm/15.75"...
- Page 3 STEP 1 Attach TV Plate to TV WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; Please contact the seller via Amazon "Orders".
- Page 4 1-1 Select TV Screws Select the right length and diameter TV screws. 1-2 Need Spacer Tips: If you need to combine M6/M8(c/e/f) screws with 2.5mm spacers( i ), you have to remove the inner circle. Washer are not required for M8 screws Round Back Long Screw Cable lnterference...
-
Page 5: Step 2 Attach Wall Plate To Wall
STEP 2 Attach Wall Plate to Wall For wood stud installation, follow STEP 2A on PAGE 5 For concrete installation, follow STEP 2B on PAGE 7 Parts and Hardware Wall Plate Lag Bolt M7x55mm Level x1 STEP 2A Attach Wall Plate to Wall Wood Stud Option Min. - Page 6 Level Wall plate Centre line CAUTION: To avoid potential personal injury or property damage: Install wall plate using three lag bolts . Tighten the lag bolts only until they are pulled firmly against the wall plate. Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
- Page 7 STEP 2B Attach Wall Plate to Solid Concrete Wall Concrete Wall Anchor (Not included) Min. STOP STOP 8"(203mm) Concrete Wall Anchor 4pcs (Anchor Size: φ10x50mm) Please contact the seller via Amazon "Orders" and message to us to have these additional pieces shipped directly to you.
- Page 8 STEP 3 Hang and Secure TV to Wall Plate 3-1 Wall Plate installation Integrity Test Before hanging TV, please try to pull the mount to make sure that it has been assembled on the wall tightly. 80 LBS (36.4 kg) 3-2 Hang and Secure TV to Wall Plate...
- Page 9 STEP 4 Adjustments 4-1 TV leveling adjustment (±4°): Loosen 4 leveling bolts on the rear of TV plate by maximum 2 turns, adjust to level, and retighten to secure. ±4° Loosen Tighten 4-2 Tilting angle adjustment (+5°/-12°) ： Pull TV to your desired angle then fasten 2 tilting bolts with Allen key +5°...
- Page 10 Hardware Velcro x3 4-3 Cables manage: Manage TV cables orderly and guide them through the velcros. Velcro...
- Page 11 Dimensions TV INTERFACE MAX:400mm [15.75in] MIN:75mm [2.95in] MAX:400mm [15.75in] MIN:75mm [2.95in] WAND PLATTE FULLY ASSEMBLED MOUNT 440mm [17.32in] 95mm [3.72in] 240mm [9.45in] 131mm 420mm 117mm [5.14in] [16.54in] [4.59in] Ø7mm [Ø0.28in] TOP VIEW - EXTENDED TOP VIEW - RETRACTED 61mm [2.38in] 357mm [14.04in] SIDE VIEW - EXTENDED...
Need help?
Do you have a question about the XMM904 and is the answer not in the manual?
Questions and answers