Omron CRT1 - 10-2009 Operation Manual page 36

Features of CompoNet Slave Units
Function
Operation Time Monitor
Contact Operation Monitor
Total ON Time Monitor
Automatic Baud Rate Detection
Unit Conduction Time Monitor
Naming Units
Naming Connected Devices
Network Power Voltage Monitor
I/O Power Status Monitor
Communications Error History Monitor
Input Filter
Communications Error Output
Preventing Malfunctions Caused by
Inrush Current at I/O Startup
Power Short-circuit Detection
Unconnected Line Detection
Load Short-circuit Detection
Disconnected Line Detection
Removable Terminal Block Structure
Expansion Using Expansion Units
Scaling
Last Maintenance Date
Cumulated Count
Moving Average
Setting the Number of AD Conversion
Points
Rate of Change
Comparator
Peak/Bottom Hold
Top/Valley Hold
User Adjustment
Top/Valley Count
Temperature Range Total Time Count
Input Temperature Variation Detection
Input Error Detection Disable Function
12
Unit
CRT1-@D16S(-1)
(without Short-circuit and
Disconnected Line Detection)
Input Units
---
Yes
---
Yes
Note The Contact Operation Monitor and the Total ON Time Monitor cannot be
used at the same time for the same contact.
Digital I/O Slave Units
Units with e-CON Connectors
(with Short-circuit and Disconnected
Output I/O Units Input Units
Units
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes Yes
Yes
--- Yes
Yes Yes
--- Yes
---
---
---
---
---
---
---
Yes
---
---
---
---
---
---
---
---
---
---
---
---
Section 1-1
Yes: Supported, : Not supported
---
CRT1-@D16SH(-1)
Line Detection)
Output
Units
--- Yes
Yes ---
--- Yes
Yes ---
Yes ---
Yes ---
--- Yes
--- Yes
I/O units
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes