Intended Audience; General Precautions; Safety Precautions - Omron CRT1 - 10-2009 Operation Manual

Intended Audience

1 Intended Audience
2

General Precautions

!WARNING
3

Safety Precautions

!WARNING
!WARNING
xviii
This manual is intended for the following personnel, who must also have
knowledge of electrical systems (an electrical engineer or the equivalent).
• Personnel in charge of installing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of managing FA systems and facilities.
The user must operate the product according to the performance specifica-
tions described in the operation manuals.
Before using the product under conditions which are not described in the
manual or applying the product to nuclear control systems, railroad systems,
aviation systems, vehicles, combustion systems, medical equipment, amuse-
ment machines, safety equipment, and other systems, machines, and equip-
ment that may have a serious influence on lives and property if used
improperly, consult your OMRON representative.
Make sure that the ratings and performance characteristics of the product are
sufficient for the systems, machines, and equipment, and be sure to provide
the systems, machines, and equipment with double safety mechanisms.
This manual provides information for programming and operating the Unit. Be
sure to read this manual before attempting to use the Unit and keep this man-
ual close at hand for reference during operation. Be sure this manual is deliv-
ered to the persons actually using the CompoNet Slave Units and Repeater
Units.
It is extremely important that a PLC and all PLC Units be used for the speci-
fied purpose and under the specified conditions, especially in applications that
can directly or indirectly affect human life. You must consult with your OMRON
representative before applying a PLC System to the above-mentioned appli-
cations.
Do not attempt to take any Unit apart and do not touch the interior of any Unit
while the power is being supplied. Also, do not turn ON the power supply
while the cover is open. Doing any of these may result in electric shock.
Do not input voltages or currents exceeding the rated range to the Unit.
Exceeding the rated range may cause Unit failure or fire.
1