Omron CP1L CPU Getting Started Manual page 41

4
4-1 Preparing for Programming
Connecting to a Computer and Installing the USB Driver
4
Note
40
SYSMAC CP1L Getting Started Guide
This section explains how to connect CP1L to a computer running Windows XP.
For details on connecting CP1L to a computer running Windows 2000, refer to
1-3-1 Connecting with a Commercially Available USB Cable of CP Series CP1L
CPU Unit User's Manual (W462).
1.
Turn the power ON for CP1L and the computer.
2.
Using a USB cable (2) , connect the peripheral USB port (3) on CP1L to a
USB port on the computer (1) .
When the computer detects CP1L, the following message will be displayed.
The Found New Hardware Wizard dialog box will be displayed. This screen will be
used to install the USB driver.
The programming console is not available for CP1L.
3.
On the Found New Hardware Wizard dialog box, select [No, not this time],
and click [Next].
Depending on computer environment, the Found New Hardware Wizard dialog box
may not be displayed. If it is not displayed, proceed to step 4.