Related Manuals - Omron CJ2 - 02-2010 User Manual

Related Manuals

Manuals related to a PLC built using a CJ-series CJ2 CPU Unit are listed in the following table. Use
these manuals for reference.
Manual Cat. No.
CJ-series CJ2 CPU W473
Unit Software User's
Manual (this man-
ual)
CJ-series CJ2 CPU W472
Unit Hardware
User's Manual
EtherNet/IP Units W465
Operation Manual
CS/CJ/NSJ-series W474
Instructions Refer-
ence Manual
CS/CJ/CP/NSJ- W342
series Communica-
tions Command Ref-
erence Manual
CX-One Setup Man- W463
ual
38
Model
CJ2H-CPU6@-EIP Software specifications for
CJ2H-CPU6@ CJ2 CPU Units
CJ2M-CPU@@
CJ2H-CPU6@-EIP Hardware specifications for
CJ2H-CPU6@ CJ2 CPU Units
CJ2M-CPU@@
CJ2H-CPU6@-EIP Using the built-in Ether-
CJ2M-CPU3@ Net/IP port of the CJ2 CPU
CS1W-EIP21 Unit
CJ1W-EIP21
CJ2H-CPU6@-EIP Information on instructions
CJ2H-CPU6@
CJ2M-CPU@@
CS1G/H-CPU@@H
CS1G/H-CPU@@-V1
CJ1G/H-CPU@@H
CJ1G-CPU@@
CJ1M-CPU@@
NSJ@-@@@@(B)-G5D
NSJ@-@@@@(B)-M3D
CJ2H-CPU6@-EIP Information on communi-
CJ2H-CPU6@ cations for CS/CJ/CP-
CJ2M-CPU@@ series CPU Units and NSJ-
CS1G/H-CPU@@H series Controllers
CS1G/H-CPU@@-V1
CS1D-CPU@@H
CS1D-CPU@@S
CS1W-SCU@@-V1
CS1W-SCB@@-V1
CJ1H-CPU@@H-R
CJ1G/H-CPU@@H
CJ1G-CPU@@P
CJ1M-CPU@@
CJ1G-CPU@@
CJ1W-SCU@@-V1
CP1H-X@@@@-@
CP1H-XA@@@@-@
CP1H-Y@@@@-@
CP1L-M/L@@@-@
CP1E-E@@D@-@
CP1E-N@@D@-@
NSJ@-@@@@(B)-G5D
NSJ@-@@@@(B)-M3D
CXONE-AL@@C-V@/ Installing software from the
AL@@D-V@ CX-One
Application
Describes the following for CJ2 CPU Units:
• CPU Unit operation
• Internal memory
• Programming
• Settings
• Functions built into the CPU Unit
Also refer to the Hardware User's Manual
(W472)
Describes the following for CJ2 CPU Units:
• Overview and features
• Basic system configuration
• Part nomenclature and functions
• Mounting and setting procedure
• Remedies for errors
• Also refer to the Software User's Manual
(W473).
Describes the built-in EtherNet/IP port and Eth-
erNet/IP Units.
Describes basic settings, tag data links, FINS
communications, and other functions.
Describes each programming instruction in
detail.
Also refer to the Software User's Manual (W473)
when you do programming.
Describes C-mode commands and FINS com-
mands
Refer to this manual for a detailed description of
commands for communications with the CPU
Unit using C mode commands or FINS com-
mands.
Note This manual describes the communica-
tions commands that are addressed to
CPU Units. The communications path that
is used is not relevant and can include any
of the following: serial ports on CPU Units,
communications ports on Serial Commu-
nications Units/Boards, and Communica-
tions Units. For communications
commands addressed to Special I/O Units
or CPU Bus Units, refer to the operation
manual for the related Unit.
Provides an overview of the CX-One FA Inte-
grated Tool Package and describes the installa-
tion procedure.
CJ2 CPU Unit Software User's Manual
Description