Omron CJ2 - 02-2010 User Manual page 609

Address
Name
Words Bits
A600 to --- Macro Area
A603 Input Words
A604 to --- Macro Area
A607 Output
Words
A619 A619.02 Serial Port
Settings
Changing
Flag
CJ2 CPU Unit Software User's Manual
Function
When MCRO(099) is executed, the contents of the four
specified source words (starting from the 1st input
parameter word) are copied here. The contents of the
four copied words are then passed to the subroutine.
After the subroutine specified in MCRO(099) has been
executed, the results of the subroutine are transferred
from A604 through A607 to the specified destination
words. (output parameter words)
ON while the RS-232C port's communications settings
are being changed. This flag will be turned ON when
STUP(237) is executed and it will be turned OFF after
the settings have been changed.
Status
after Status at
Settings
mode
change
Input data: Cleared Cleared
4 words
Output data: Cleared Cleared
4 words
ON: Changing Retained Cleared
OFF: Not changing
Appendices
Write timing/
Related flags,
startup
settings
---
---
---
A-133