Omron CJ - REFERENCE MANUAL 10-2009 Reference Manual page 268

3. Instructions
TTIM/TTIMX
Instruction
ACCUMULATIVE TIMER
BCD
Symbol
Applicable Program Areas
Function block
Area
definitions
Usage OK
Operands
Operand
N Timer Number
S Set Value
N: Timer Number
The timer number must be between 0000 to 4095 (decimal).
S: Set Value
The set value must be between #0000 and 9999 (BCD).
&0 to 65535 decimal or #0000 to FFFF hex (Binary).
Operand Specifications
Word addresses
Area
CIO WR HR
N --- --- ---
S OK OK OK
Flags
Name
Error Flag
230
Mnemonic Variations
TTIM ---
TTIMX ---
TTIM
Timer input
TTIM(087)
N
N: Timer number
Reset input
S S: Set value
Block program areas Step program areas
Not allowed OK
Description
AR T C DM EM
--- --- --- ---
OK
OK OK OK OK
Label
ER • ON if N is indirectly addressed through an Index Register but the address in the Index Register is not
the address of a timer Completion Flag or timer PV.
• ON if in BCD mode and S does not contain BCD data.
• OFF in all other cases.
Function
code
087
TTIM(087)/TTIMX(555) operates an incrementing
timer with units of 0.1-s.
555
Binary
Timer input
Reset input
Subroutines
OK
Data type
TTIM
TIMER
WORD
Indirect DM/EM
addresses
Con-
stants
@DM *DM
DR
@EM *EM
--- --- --- ---
OK OK OK OK
Operation
CS/CJ/NSJ Series Instructions Reference Manual (W474)
Function
TTIMX
TTIMX(555)
N N: Timer number
S S: Set value
SFC action or transition
Interrupt tasks
programs
Not allowed OK
Size
TTIMX
TIMER 1
UINT 1
Registers Flags
Pulse
bits
Indirect
IR TK CF
using IR
--- OK --- ---
TR
bits
--- ---